All Products

The Color Kit is the first integrated color mixing system for resin 3D printing, allowing you to create parts in a wide range of colors—without the need for manual finishing, dyeing, or painting.

Each kit includes a Color Base cartridge and five Color Pigments, enabling you to mix and print matte, opaque parts directly in your chosen shades.

Nylon 11 Pro Powder is the first SLS material that combines the exceptional toughness and durability of injection-molded thermoplastics, with the ease of use and consistent print performance of Nylon 12. 

It delivers five times the elongation at break, twice the impact resistance, and ten times the toughness in fine, thin features compared to Nylon 12 — with the same 30% refresh rate and print success rate, so it's just as reliable and economical to run.

An engineering material for building the highest-performing prototypes and end-use parts, Nylon 11 Pro Powder is ideal for impact-resistant and durable housings, snap fits and living hinges, thin-walled ducts and enclosures, as well as orthotics, prosthetics, and wearables.

Form Studio Wash+Cure Rinse Bucket enables a dedicated two-stage washing process for your printed parts. Use it for a secondary rinse after the primary wash to prevent solvent saturation and remove lingering resin residue for a cleaner final part. Includes a wash bucket with lid, internal basket, and solvent squeeze bottle.

Form Studio Wash+Cure is an all-in-one, compact, and affordable post-processing unit that handles both washing and curing for your resin 3D prints.

Washing mode: All resin 3D printed parts need washing to remove residual resin. Form Studio Wash+Cure agitates IPA or alternative solvents around parts for thorough, efficient cleaning. When washing is done, simply raise the internal basket out of the solvent to let parts air dry and avoid over-soaking, warped prints.

 Curing mode: Using 405 nm light, Form Studio Wash+Cure

Tough 1500 Resin V2 is a resilient material with strength, stiffness, and toughness comparable to polypropylene (PP), offering exceptional resistance to fractures, impacts, and shattering.

Create parts that balance stiffness and ductility, whether for compliant mechanisms or rugged enclosures with self-tapping screws and snap fits. Tough 1500 Resin V2 enables a wide range of applications, from functional prototypes to end-use jigs and fixtures.

This resin is supported on Form Studio 1 and incompatible with Form 4 Generation printers. For Form 4 Generation printers use Tough 1500 (Form 4).

Alpha Fast Resin is a fast-printing general purpose resin with print speeds up to 130 mm/h, for iterative prototypes in minutes or print the entire build volume on Form Studio 1 in less than two hours.

Build prototypes faster or rapidly create jigs, fixtures, and tooling with a tensile strength of 46 MPa and 34% elongation at break. The Alpha Resin Family uses low-odor components and post-processed parts meet safety requirements for long-term skin contact.

Alpha Resins are the first 3D printing materials certified for UL GREENGUARD Gold, when printed on Form Studio 1 and using VOC Extractor.

Alpha Model Fast is only supported on the Form Studio 1.

Alpha Model Resin is a supremely detailed resin with a deep, fully matte, neutral surface that captures every detail, down to the finest crevices and textures.

Create detailed scale models, life-like sculptures, and richly textured miniatures with thin features that flex instead of snapping, so finished models survive painting, transport, and drops.

The Alpha Resin Family uses low-odor components and post-processed parts meet safety requirements for long-term skin contact. Alpha Resins are the first 3D printing materials certified for UL GREENGUARD Gold, when printed on Form Studio 1 and using VOC Extractor.

Alpha Model Resin is only supported on the Form Studio 1.

Alpha White Resin is a versatile general purpose resin for aesthetic, functional parts, combining fine detail and a rich, matte finish with fast print speeds and superior mechanical properties.

Create concept models, form-and-fit prototypes, and jigs that exceed the strength and toughness of comparable ABS-like resins without sacrificing fine features and surface quality.

The Alpha Resin Family uses low-odor components and post-processed parts meet safety requirements for long-term skin contact. Alpha Resins are the first 3D printing materials certified for UL GREENGUARD Gold, when printed on Form Studio 1 and using VOC Extractor.

Alpha White Resin is only supported on the Form Studio 1.

Alpha Grey Resin is a versatile general purpose resin for aesthetic, functional parts, combining fine detail and a rich, matte finish with fast print speeds and superior mechanical properties.

Create concept models, form-and-fit prototypes, and jigs that exceed the strength and toughness of comparable ABS-like resins without sacrificing fine features and surface quality.

The Alpha Resin Family uses low-odor components and post-processed parts meet safety requirements for long-term skin contact. Alpha Resins are the first 3D printing materials certified for UL GREENGUARD Gold, when printed on Form Studio 1 and using VOC Extractor.

Alpha Grey Resin is only supported on the Form Studio 1.

Alpha Clear Resin is a versatile transparent 3D printing resin for aesthetic, functional parts, combining an optically clear, neutral-color appearance with fast print speeds and superior mechanical properties.

Create transparent enclosures, lighting prototypes, and molds that exceed the strength and toughness of comparable ABS-like resins with a surface quality that rivals acrylic.

The Alpha Resin Family uses low-odor components and post-processed parts meet safety requirements for long-term skin contact. Alpha Resins are the first 3D printing materials certified for UL GREENGUARD Gold, when printed on Form Studio 1 and using VOC Extractor.

Alpha Clear Resin is only supported on the Form Studio 1.

Alpha Black Resin is a versatile general purpose resin for aesthetic, functional parts, combining fine detail and a rich, matte finish with fast print speeds and superior mechanical properties.

Create concept models, form-and-fit prototypes, and jigs that exceed the strength and toughness of comparable ABS-like resins without sacrificing fine features and surface quality.

The Alpha Resin Family uses low-odor components and post-processed parts meet safety requirements for long-term skin contact. Alpha Resins are the first 3D printing materials certified for UL GREENGUARD Gold, when printed on Form Studio 1 and using VOC Extractor.

Alpha Black Resin is only supported on the Form Studio 1.

VOC Extractor is a compact add-on that reduces volatile organic compound levels while your printer runs. Air passes through two carbon filters, lasting roughly 330 hours of print time and replaceable in seconds. Three fan speeds let you match airflow to your needs.

Compatible with Form Studio 1 and Form 4.

UL GREENGUARD Gold Certification applies to Form Studio 1 used with Alpha Resins.