INTAMSYS PPA-CF 3D printing filament.

1104-0020

INTAMSYS | PPA-CF

$168.00

INTAM™ PPA-CF is a polyphthalamide (PPA) filament reinforced with 15% chopped carbon fiber for FDM printing. As a semi-crystalline aromatic polyamide, PPA provides greater strength, stiffness, and thermal resistance than nylon 6, while being less sensitive to moisture. It also offers excellent chemical resistance, fatigue resistance, and creep resistance.

  • Priority Delivery

    Typically ships within 1 week

  • After-Sale Service

    Email and Phone support

  • Physical Properties

  • Mechanical Properties

  • Request Information

Density (ISO 1183)

1.20 g/cm³

Melting Point (ISO 11357)

237 °C

Melt Index (300°C, 2.16 kg)

3.4 g/10min

Heat Deflection Temperature (unannealed)(ISO 75: Method A, 0.45MPa)

84 °C

Heat Deflection Temperature (annealed)(ISO 75: Method A, 0.45MPa)

191 °C

Water Absorption (ISO 62: Method 1)

1.37%

Tensile Strength XY (ISO 527)

81.7 MPa

Young’s Modulus XY (ISO 527)

6945 MPa

Elongation at Break XY (ISO 527)

2.0%

Flexural Strength XY (ISO 178)

167.5 MPa

Flexural Modulus XY (ISO 178)

6261 MPa

Impact Strength XY (ISO 179, Notched)

20.1 kJ/m2

Tensile Strength Z (ISO 527)

30.2 MPa

Young’s Modulus Z (ISO 527)

2977 MPa

Elongation at Break Z (ISO 527)

1.3%

Need more information?

We’re committed to providing expert insights and responsive service to guide you every step of the way. To get started, simply fill out the form below and we’ll be in touch shortly.

Need more information?

We’re committed to providing expert insights and responsive service to guide you every step of the way. To get started, simply fill out the form below and we’ll be in touch shortly.

A CLOSER LOOK

EXPLORE PPA-CF BY INTAMSYS

Download Tech Sheet

Low moisture uptake

Better dimensional stability than PA6 nylons.

Heat & chemical resistance

Performs well in demanding environments.

High strength & stiffness

Carbon fiber reinforced for strong, rigid parts.

Wear resistant

Durable against friction and mechanical load.

FOR PPA-CF by intamsys

OUR FEATURED PRODUCTS

FIND YOUR ANSWERS HERE

FREQUENTLY ASKED QUESTIONS

What is PPA-CF by INTAMSYS?

PPA-CF is a polyphthalamide filament reinforced with carbon fiber, designed for strong, stiff, and heat-resistant parts.

What are the main benefits of PPA-CF by INTAMSYS?

It offers high mechanical strength, excellent dimensional stability, reduced moisture absorption, and resistance to heat, wear, and chemicals.

What are the recommended printing conditions for PPA-CF by INTAMSYS?

It prints best at 280–320 °C with a heated bed (100–120 °C) and an enclosed chamber. A hardened nozzle is required due to abrasion.

What challenges should users expect with PPA-CF by INTAMSYS?

The filament is abrasive on standard brass nozzles, requires careful drying to avoid moisture defects, and benefits from controlled chamber temperatures to reduce warping.

What are the typical applications for PPA-CF by INTAMSYS?

PPA-CF is used in automotive, aerospace, and industrial parts where high strength, heat tolerance, and chemical resistance are critical.