Formlabs Products

Grey Resin is a versatile material ideal for general-purpose prototyping, design models, and parts with fine details. Its matte surface finish, opaque appearance, and precision make prints ready to use directly off the printer. The neutral grey tone also provides an excellent base for painting or additional finishing.

Grey Resin V4.1, compatible with Form 3 Series printers, offers improved toughness compared to Grey Resin V4 (Legacy).

IMPORTANT: 5 L Container Requires a Resin Pump to work.

Fast Model Resin is Formlabs fastest printing material, reaching speeds over 100 mm per hour. It allows dental models to be produced in minutes and large prototypes in under two hours.

Evolved from Draft Resin, it leverages the power of the Form 4 Series to deliver up to 3× faster print speeds than its predecessor, along with improved mechanical performance.

IMPORTANT: 5 L Container Requires a Resin Pump to work.

Low Force Stereolithography (LFS)™ 3D printing uses linear illumination and a flexible film tank to turn liquid resin into flawless parts. A key component of the LFS process, the strong dual-layer film at the bottom of the Form 3L Resin Tank allows for a dynamic and precise print process, scaled up for large format printing.

For use with Form 3L and Form 3BL.

Notice: Form 3L Resin Tank V3 offers an improved print success rate in some cases compared to the previous version of the Form 3L Resin Tank V2.

The Color Kit is the first integrated color mixing system for resin 3D printing, allowing you to create parts in a wide range of colors—without the need for manual finishing, dyeing, or painting.

Each kit includes a Color Base cartridge and five Color Pigments, enabling you to mix and print matte, opaque parts directly in your chosen shades.

Nylon 11 Pro Powder is the first SLS material that combines the exceptional toughness and durability of injection-molded thermoplastics, with the ease of use and consistent print performance of Nylon 12. 

It delivers five times the elongation at break, twice the impact resistance, and ten times the toughness in fine, thin features compared to Nylon 12 — with the same 30% refresh rate and print success rate, so it's just as reliable and economical to run.

An engineering material for building the highest-performing prototypes and end-use parts, Nylon 11 Pro Powder is ideal for impact-resistant and durable housings, snap fits and living hinges, thin-walled ducts and enclosures, as well as orthotics, prosthetics, and wearables.

Form Studio Wash+Cure Rinse Bucket enables a dedicated two-stage washing process for your printed parts. Use it for a secondary rinse after the primary wash to prevent solvent saturation and remove lingering resin residue for a cleaner final part. Includes a wash bucket with lid, internal basket, and solvent squeeze bottle.

Form Studio Wash+Cure is an all-in-one, compact, and affordable post-processing unit that handles both washing and curing for your resin 3D prints.

Washing mode: All resin 3D printed parts need washing to remove residual resin. Form Studio Wash+Cure agitates IPA or alternative solvents around parts for thorough, efficient cleaning. When washing is done, simply raise the internal basket out of the solvent to let parts air dry and avoid over-soaking, warped prints.

 Curing mode: Using 405 nm light, Form Studio Wash+Cure

Tough 1500 Resin V2 is a resilient material with strength, stiffness, and toughness comparable to polypropylene (PP), offering exceptional resistance to fractures, impacts, and shattering.

Create parts that balance stiffness and ductility, whether for compliant mechanisms or rugged enclosures with self-tapping screws and snap fits. Tough 1500 Resin V2 enables a wide range of applications, from functional prototypes to end-use jigs and fixtures.

This resin is supported on Form Studio 1 and incompatible with Form 4 Generation printers. For Form 4 Generation printers use Tough 1500 (Form 4).

Alpha Fast Resin is a fast-printing general purpose resin with print speeds up to 130 mm/h, for iterative prototypes in minutes or print the entire build volume on Form Studio 1 in less than two hours.

Build prototypes faster or rapidly create jigs, fixtures, and tooling with a tensile strength of 46 MPa and 34% elongation at break. The Alpha Resin Family uses low-odor components and post-processed parts meet safety requirements for long-term skin contact.

Alpha Resins are the first 3D printing materials certified for UL GREENGUARD Gold, when printed on Form Studio 1 and using VOC Extractor.

Alpha Model Fast is only supported on the Form Studio 1.

Alpha Model Resin is a supremely detailed resin with a deep, fully matte, neutral surface that captures every detail, down to the finest crevices and textures.

Create detailed scale models, life-like sculptures, and richly textured miniatures with thin features that flex instead of snapping, so finished models survive painting, transport, and drops.

The Alpha Resin Family uses low-odor components and post-processed parts meet safety requirements for long-term skin contact. Alpha Resins are the first 3D printing materials certified for UL GREENGUARD Gold, when printed on Form Studio 1 and using VOC Extractor.

Alpha Model Resin is only supported on the Form Studio 1.

Alpha White Resin is a versatile general purpose resin for aesthetic, functional parts, combining fine detail and a rich, matte finish with fast print speeds and superior mechanical properties.

Create concept models, form-and-fit prototypes, and jigs that exceed the strength and toughness of comparable ABS-like resins without sacrificing fine features and surface quality.

The Alpha Resin Family uses low-odor components and post-processed parts meet safety requirements for long-term skin contact. Alpha Resins are the first 3D printing materials certified for UL GREENGUARD Gold, when printed on Form Studio 1 and using VOC Extractor.

Alpha White Resin is only supported on the Form Studio 1.

Alpha Grey Resin is a versatile general purpose resin for aesthetic, functional parts, combining fine detail and a rich, matte finish with fast print speeds and superior mechanical properties.

Create concept models, form-and-fit prototypes, and jigs that exceed the strength and toughness of comparable ABS-like resins without sacrificing fine features and surface quality.

The Alpha Resin Family uses low-odor components and post-processed parts meet safety requirements for long-term skin contact. Alpha Resins are the first 3D printing materials certified for UL GREENGUARD Gold, when printed on Form Studio 1 and using VOC Extractor.

Alpha Grey Resin is only supported on the Form Studio 1.