Additive Manufacturing Materials

INTAMSYS SP5010 is an easy breakaway support filament designed for PPA-CF/GF. It provides strong adhesion and heat resistance during printing while remaining simple to remove by hand after printing.

Tough 1000 Resin is a durable, impact-resistant material with strength, stiffness, and toughness comparable to HDPE. It offers exceptional wear and fatigue resistance for long-term use.

With 180% elongation at break and 128 in-lb Gardner impact strength, it outperforms HDPE—perfect for parts that flex or deform without cracking. Its matte dark gray finish provides smooth, low-friction surfaces.

Optimized for the Form 4 Series, Tough 1000 Resin delivers 5× higher fracture toughness and 2× greater elongation than Durable Resin, along with improved temperature and aging resistance.

IMPORTANT: 5 L Container Requires a Resin Pump (Form 4).

Nylon 12 GF Powder is a glass-filled, biocompatible material that provides superior stiffness and heat resistance for demanding industrial environments. It is well-suited for producing rigid functional prototypes and end-use parts where structural strength and thermal stability are essential.

INTAMSYS® TPU is a highly flexible thermoplastic polyurethane (TPU) filament that delivers excellent print quality, strong elasticity, and a high strain-to-failure.

True Cast Resin is a wax-filled material created for precision casting, capable of producing everything from intricate jewelry to complex engineering components up to 5 mm thick. It delivers accurate parts with exceptional detail and smooth surface quality.

Engineered for reliability and versatility, True Cast Resin integrates seamlessly into a wide range of burnout schedules. Its low thermal expansion, minimal shrinkage, and 0.03% ash content ensure clean burnout and consistently high-quality casting results.

For ultrafine wire filigree and lightweight jewelry, Castable Wax Resin is recommended. For larger and more demanding engineering components, Clear Cast Resin offers the best solution.

Surgical Guide Resin is an autoclavable, biocompatible material designed for 3D printing surgical guides, drilling templates, pilot drill guides, and device sizing models. It delivers the accuracy, quality, and performance required for dental and surgical applications.

Formulated specifically for Formlabs printers, Surgical Guide Resin has been rigorously validated to meet solvent disinfection and autoclave sterilization standards for implant systems.

IMPORTANT: 5 L Container Requires a Resin Pump to work.

Model Resin is a fast-printing material designed for high-accuracy restorative models. Developed to meet the precision, reliability, and throughput demands of restorative dentistry, it enables the production of accurate models and dies with sharp margins and contacts—delivering high-quality results on tight timelines.

Model Resin V3 is compatible with Form 2 and Form 3 Series printers. For the Form 4 Series, choose Precision Model Resin for superior accuracy, up to 3× faster print speeds, and enhanced aesthetics.

An optional Fit Tuning Test on Form 3, Form 3B, and Form 3B+ makes it possible to fine-tune dimensional fit for specific use cases.

IMPORTANT: 5 L Container Requires a Resin Pump to work.

Model Resin V2 is designed for Form 2 and Form 3 Series printers, while Precision Model Resin (Form 4) delivers higher accuracy, faster print speeds, and enhanced aesthetics.

Choose Model Resin V3 instead for a fast-printing material for the production of high-accuracy restorative models.

IMPORTANT: 5 L Container Requires a Resin Pump to work.

Clear Cast Resin is engineered for investment casting, allowing direct printing of patterns ready for investment and casting. It delivers ultra-low thermal expansion, minimal ash, and is free of heavy metals.

When combined with latticing software, Clear Cast Resin (Form 4) is especially well-suited for larger parts, excelling with geometries thicker than 3 mm.

IMPORTANT: 5 L Container Requires a Resin Pump to work.

Color Kit is the first integrated color mixing system for resin 3D printing on the Form 4. It lets you create parts in a wide range of colors directly, without the need for post-processing steps like finishing, dyeing, or painting.

Each kit includes a Color Base cartridge and all five Color Pigments. By mixing these, you can print matte, opaque parts on the Form 4 in a full spectrum of colors—no painting or extra finishing required.

PA6/66 is a copolymer of PA6 and PA66 offering high rigidity, strength, and impact resistance, making it versatile for many engineering applications. With a low coefficient of friction, it’s also ideal for ergonomic tools and moving components.

INTAMSYS® ABS-HS is an Acrylonitrile-Butadiene-Styrene (ABS) filament engineered for FFF 3D printing. Designed for speed, it delivers a melt index of 9–24 g, enabling up to 250% higher flow rates than standard ABS. The material combines excellent print quality, strong mechanical performance, and reliable heat resistance with moderate printing temperatures and outstanding warping resistance.