Formlabs Products

True Cast Resin is a wax-filled material created for precision casting, capable of producing everything from intricate jewelry to complex engineering components up to 5 mm thick. It delivers accurate parts with exceptional detail and smooth surface quality.

Engineered for reliability and versatility, True Cast Resin integrates seamlessly into a wide range of burnout schedules. Its low thermal expansion, minimal shrinkage, and 0.03% ash content ensure clean burnout and consistently high-quality casting results.

For ultrafine wire filigree and lightweight jewelry, Castable Wax Resin is recommended. For larger and more demanding engineering components, Clear Cast Resin offers the best solution.

Surgical Guide Resin is an autoclavable, biocompatible material designed for 3D printing surgical guides, drilling templates, pilot drill guides, and device sizing models. It delivers the accuracy, quality, and performance required for dental and surgical applications.

Formulated specifically for Formlabs printers, Surgical Guide Resin has been rigorously validated to meet solvent disinfection and autoclave sterilization standards for implant systems.

IMPORTANT: 5 L Container Requires a Resin Pump to work.

Model Resin is a fast-printing material designed for high-accuracy restorative models. Developed to meet the precision, reliability, and throughput demands of restorative dentistry, it enables the production of accurate models and dies with sharp margins and contacts—delivering high-quality results on tight timelines.

Model Resin V3 is compatible with Form 2 and Form 3 Series printers. For the Form 4 Series, choose Precision Model Resin for superior accuracy, up to 3× faster print speeds, and enhanced aesthetics.

An optional Fit Tuning Test on Form 3, Form 3B, and Form 3B+ makes it possible to fine-tune dimensional fit for specific use cases.

IMPORTANT: 5 L Container Requires a Resin Pump to work.

Model Resin V2 is designed for Form 2 and Form 3 Series printers, while Precision Model Resin (Form 4) delivers higher accuracy, faster print speeds, and enhanced aesthetics.

Choose Model Resin V3 instead for a fast-printing material for the production of high-accuracy restorative models.

IMPORTANT: 5 L Container Requires a Resin Pump to work.

Clear Cast Resin is engineered for investment casting, allowing direct printing of patterns ready for investment and casting. It delivers ultra-low thermal expansion, minimal ash, and is free of heavy metals.

When combined with latticing software, Clear Cast Resin (Form 4) is especially well-suited for larger parts, excelling with geometries thicker than 3 mm.

IMPORTANT: 5 L Container Requires a Resin Pump to work.

Color Kit is the first integrated color mixing system for resin 3D printing on the Form 4. It lets you create parts in a wide range of colors directly, without the need for post-processing steps like finishing, dyeing, or painting.

Each kit includes a Color Base cartridge and all five Color Pigments. By mixing these, you can print matte, opaque parts on the Form 4 in a full spectrum of colors—no painting or extra finishing required.

Over time, tube performance will deteriorate resulting in slower fill times. Resin Pumping System tubing must be changed out every 6 months or when changing to a different resin type. This kit includes both the internal tubing for the Resin Pump as well the Transfer Tube to connect the Resin Pump to the 5 L Resin Container.

Replacement Tubing for the Resin Pumping System. Resin Pumping System tubing must be replaced every 6 months to maintain resin pump performance or any time the is changed to a different resin type. This kit includes the internal pump tubing and transfer tubing needed for the replacement.

Nylon 11 CF Powder is a carbon fiber-filled material, perfect for applications that require both superior stiffness and strength. Produce lightweight, rigid parts that remain structurally and thermally stable and can sustain repeated impact.

Nylon 11 CF Powder requires to be printed on Fuse 1+ 30W with inert atmospheric control.

Form Wash automatically cleans printed parts thoroughly and efficiently with IPA or alternative solvents. Keep parts directly on the Build Platform as you transition them from the printer to Form Wash, or remove parts and place them in the wash basket. Parts are precisely and thoroughly agitated in solvent with an impeller, getting every nook and cranny perfectly clean, automatically for the appropriate time. When washing completes, the Form Wash automatically raises parts out of the IPA so they can air dry.

The Form 4 Build Platform features a durable aluminum surface. Keeping a spare platform on hand helps you maintain nonstop printing—swap quickly when changing resins or starting a new job while removing finished parts. For the fastest, easiest workflow, we recommend the Build Platform Flex with Quick Release Technology.

Form 4 Build Platform Flex with Quick Release Technology allows you to quickly and easily remove parts from the print surface without tools in seconds. Recommended for almost all prints, Build Platform Flex eliminates the risk of damaging your part and streamlines your workflow.

Nylon 12 GF Powder is a glass-filled, biocompatible material that provides superior stiffness and heat resistance for demanding industrial environments. It is well-suited for producing rigid functional prototypes and end-use parts where structural strength and thermal stability are essential.